QAR
36.00
Material: A new generation of polyurethane-based sealants and construction adhesives. The product is a low-monomer, one-component, polyurethane-based material.
Size: 600 ml
Carton contents: 600ml cartridge
Key specifications:
Smart features
- very rapid hardening
Bubble-free hardening
- Sagging resistant, suitable for vertical applications
- Low percentage of monomer (no marks)
Its features
- Designed to fill expansion and contraction joints between different structural elements and to seal edges and perimeter around windows, doors, waterproofing, etc.
-An environmentally friendly product with low emissions.
- Easy to use, no primer is needed, even on wet surfaces.
- Water-based paint is acceptable.
- Expansion coefficient up to 800% of the basic size.
- It does not lose its elastic properties over time, which ensures that it does not separate from surfaces exposed to mechanical loads.
- High adhesion strength to different surfaces.
- It withstands harsh weather conditions as it maintains its properties when the temperature reaches 70 degrees Celsius.
- UV resistant.
How to use:
1- The partition to be insulated must be clean and free of dust.
2- The product must be applied using a special cartridge gun.
3- It must be ensured that the depth of the filling is not less than 10 mm and not more than 40 mm.
4- If the gaps are wider than 40 mm, it is preferable to use a supportive filling.
5- The surface is leveled immediately after application.
6- It is preferable to protect the surface from water and dust until it is completely dry.
7- Results may vary depending on the nature of the surface, temperature and humidity.
Validity:
Two years, provided that the required storage and transportation conditions are met.
