ريال
179.00
Suitable for:
Porcelain tiles, ceramic tiles, granite, and other siliceous stone surfaces require increased adhesion.
Material : Non-slip
How to use it :
A ready-to-use product that does not require dilution.
Application:
1. Test the product on a small, inconspicuous area before application.
2. Provide the necessary protection for the surrounding areas.
3. Wash the surface thoroughly using a suitable cleaner.
4- Apply a generous layer of Easy Grip product using a brush, covering the entire area to be treated.
5. Leave it to react for 10 minutes, adding more product if necessary to prevent the surface from drying out.
6. Remove any residue and rinse thoroughly. Repeat this process if necessary.
FILA "Cleaner Pro" 7 - After treatment, we recommend washing the surface using a neutral detergent.
Key specifications :
• Increases the surface friction coefficient
It does not form a layer and leaves no residue.
• Product for professional use
• Fast acting
• Does not change the appearance of the material
• Ideal for polished or unpolished siliceous stones, such as granite, gneiss, and others.
Areas of application
• To reduce the risk of slipping on porcelain tile flooring in outdoor areas, around swimming pools, or in places where water collects.
• To address design flaws resulting from the use of materials with an insufficient coefficient of friction for the installation site.
• On small surfaces typically used barefoot, such as bathtubs, showers, and spa areas, to increase slip resistance.
• On exterior surfaces, such as stairs or doorways made of granite or silica stone, where rain or humidity can create slippery conditions.
• The treatment can be applied to limited areas of the surface where the risk of slipping is higher, for example: entrances to public areas and stairs.
A ready-to-use product.
Determining the duration of contact
Due to the variety of materials, the optimal contact time should be determined by testing on an unmounted slab or a limited, concealed area. Protect adjacent materials and areas not to be treated.
PROGRIP takes effect after just one minute. After the one-minute test, if necessary, the test can be repeated, gradually increasing the contact time.
2. Surface Preparation: Prepare the surface for treatment by washing it according to the type of dirt present (e.g., DETERDEK PRO for removing limescale or cement deposits, or PS87 PRO for removing organic dirt or layers resulting from poor maintenance). To facilitate application, divide the surface into sections ranging from 1 to 3 square meters, ensuring that the area is clearly marked at the joints.
3. Application
Apply PROGRIP to a clean, dry surface using a leather cloth or white pad, and leave it for the specified contact time, ensuring the surface remains moist throughout.
Then clean using a liquid vacuum cleaner or remove residue with a cloth or mop. Rinse thoroughly with water and move on to the next area.
It is important to apply the product to all treated areas for the same duration and in the same way to achieve consistent results.
After treatment, we recommend washing the entire treated area with a neutralizing wash using Pro Cleanser (diluted 1:200 or 25 ml in 5 liters of water) and a white cotton pad.
Volume : 1 liter
Storage conditions: Storage temperature: Store between 5 and 30 degrees Celsius.
alert!
This treatment may reduce surface gloss; and if used for an inappropriate contact time, it may cause the material to fade.
Use the product at surface temperatures between 10 and 30 degrees Celsius.
Do not treat surfaces exposed to direct sunlight. The product is corrosive to glass.
According to internal tests, polished or glazed porcelain is unsuitable for anti-slip treatment, as the result may be ineffective and uneven.
warning!
• Keep out of reach of children.
• Do not release it into the environment after use.
